LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> B4000 Base, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Door Handle Inside Removal/Installation

Door Handle Inside Removal/Installation

  1. Remove the front door trim panel. See DOOR TRIM PANEL FRONT REMOVAL/INSTALLATION .
  2. Drill out the rivet and position the inside door handle away from the front door.
  3. Position the water shield aside.
  4. Remove the inside door handle.
    1. Disconnect the cable conduit.
    2. Disconnect the cable.
    3. Remove the inside door handle.
  5. Install in reverse order of removal.
    Fig 1: Removing/Installing Door Handle Inside
    G01935626Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals