LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> B4000 Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Propeller Shaft) >> Propeller Shaft Removal/Installation >> Propeller Shaft Installation Note

Propeller Shaft Installation Note

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the marks and install the propeller shaft.
    CAUTION:
    • When installing a new carbon-fiber propeller shaft, install the shaft with the protective cover still on and then remove after completion.
    • Handle the propeller shaft with careful attention.
  2. When installing a new propeller shaft, align the differential companion flange mark with the tag on the propeller shaft and assemble.
Fig 1: Locating Alignment Mark
G01345138Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals