LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> 6 s, 4D Hatchback, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle [Shift Mechanism] >> Shift Mechanism Removal/Installation >> Notes

Shift Mechanism Removal/Installation: Notes

  1. Remove the battery and battery tray.
  2. Remove the air cleaner component.

    (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L3] .) (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [AJ] .)

  3. Remove the dashboard completely.

    (See DASHBOARD REMOVAL/INSTALLATION .)

  4. Remove the SAS control module. See SAS CONTROL MODULE .

  5. Remove the climate control unit. (See CLIMATE CONTROL UNIT REMOVAL .) (See CLIMATE CONTROL UNIT INSTALLATION .)
  6. Remove the rear heat duct. (See REAR HEAT DUCT REMOVAL/INSTALLATION .)
  7. Remove in the order indicated in Figure or Figure .
  8. Install in the reverse order of removal.
  9. After installation, verify that the shift lever can be shifted smoothly into each position.
scientia non olet · About LEMON Manuals