LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> 6 s, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (L3)) >> Pcm Removal/Installation

Pcm Removal/Installation

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • For PCM replacement, setup the WDS and perform the PCM configuration. (See PCM REPLACEMENT .)
  1. Disconnect the negative battery cable.
  2. Remove in the order indicated.
  3. Install in the reverse order of removal.
Fig 1: Locating & Removing PCM
G01024464Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals