LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> 6 i, 4D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic [Engine Control System L3) >> OBD-II Drive Mode >> EGR System Repair Verification Drive Mode

EGR System Repair Verification Drive Mode

  1. Perform "PCM Adaptive Memory Production Drive Mode" first.
  2. Verify all accessory loads (A/C, headlights, blower fan, rear window defroster) are off.
  3. Drive the vehicle as shown in the graph.
  4. Stop the vehicle and access ON BOARD SYSTEM READINESS menu of GENERIC OBDII FUNCTION to verify the OBD monitoring status.
    • If completed, the OBD monitoring status items change from non-completed to completed.
    • If not completed, turn the ignition key off then repeat from Step  3.
  5. Access DIAGNOSTIC MONITORING TEST RESULTS menu of GENERIC OBD-II FUNCTIONS to verify the monitor results.
    • If detected values are not within specification, repair has not been completed.
  6. Verify no DTCs are available.
    Fig 1: EGR System Repair Verification Drive Mode Graph (Vehicle Speed Vs Time)
    G01012664Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals