LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> 3 s, 4D Hatchback, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Lower Panel Removal/Installation

Lower Panel Removal/Installation

  1. Disconnect the negative battery cable.
  2. Detach the hood release lever from the lower panel. (See HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION .)
  3. Remove the front scuff plate. (Driver's side) (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
  4. Remove the front side trim. (Driver's side) (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
  5. Remove the screw.
  6. Pull the lower panel outward, and detach clips A and tab.
  7. Disconnect the panel light control switch connector and the headlight leveling switch connector.
  8. Remove the lower panel.
  9. Install in the reverse order of removal.
    Fig 1: Removing/Installing Lower Panel
    G02566794Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals