LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> 3 s, 4D Hatchback, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Liftgate Side Trim Removal/Installation

Liftgate Side Trim Removal/Installation

  1. Remove the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
  2. Pull the point A of the strap hanger as shown in the figure.
  3. Remove the strap hanger.
    Fig 1: Locating Strap Hanger
    G02566824Courtesy of MAZDA MOTORS CORP.
  4. Pull the liftgate side trim outward and detach clip A, locator pin B.
  5. Detach the tab C and remove the liftgate side trim.
  6. Install in the reverse order of removal.
    Fig 2: Removing Liftgate Side Trim
    G02566825Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals