LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> 3 i, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Steering Column Switches >> Lighting System >> Auto Leveling Control Module Removal/Installation

Auto Leveling Control Module Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
  3. Disconnect the auto leveling control module connector.
  4. Remove the screw, then remove the auto leveling control module.
  5. Install in the reverse order of removal.
    Fig 1: Removing/Installing Auto Leveling Control Module
    G02566976Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals