LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> 3 i, Automatic >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Instrument Cluster Removal/Installation

Instrument Cluster Removal/Installation

  1. Perform the instrument cluster configuration when replacing it. (See INSTRUMENT CLUSTER CONFIGURATION .)
  2. Disconnect the negative battery cable.
  3. Remove the following parts:
    1. Front scuff plate (Driver's side) (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
    2. Front side trim (Driver's side) (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
    3. Hood release lever (See HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION .)
    4. Lower panel (See LOWER PANEL REMOVAL/INSTALLATION .)
    5. Meter hood (See METER HOOD REMOVAL/INSTALLATION .)
  4. Remove the screw.
  5. Remove the instrument cluster.
  6. Disconnect the connector.
  7. Install in the reverse order of removal.
  8. When replacing the instrument cluster of vehicles with the immobilizer system, perform the following procedure:
    Fig 1: Removing Instrument Cluster Connectors & Screws
    G00973480Courtesy of MAZDA MOTORS CORP.
    CAUTION:
    • The removed instrument cluster should be placed with the display side up to prevent grease from leaking from the meters.
    Fig 2: Instrument Cluster Safe Handling Positions
    G00973481Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals