Removal and Installation

Open the liftgate glass.

Fig 1: Removing Liftgate Nut Access Covers (One On Each Side)
Courtesy of MAZDA MOTORS CORP.
Remove the two liftgate nut access covers (one on each side).

Fig 2: Disconnecting Rear Window Glass Electrical Harness Connector
Courtesy of MAZDA MOTORS CORP.
Disconnect the rear window glass electrical harness connector.

Fig 3: Disconnecting Rear Window Grid Wire Electrical Connector
Courtesy of MAZDA MOTORS CORP.
Disconnect the heated window grid wire electrical connector.
NOTE:
- An assistant may be needed to carry out this step.
Fig 4: Disconnecting Liftgate Window Glass Cylinders
Courtesy of MAZDA MOTORS CORP.
Disconnect the two liftgate window glass cylinders.
1. Slide the spring retainer to the end of the socket.
2. Disconnect the socket from the ball stud.
  
  Fig 5: Removing Liftgate Window Glass Hinge Nuts
  Courtesy of MAZDA MOTORS CORP.
NOTE:
- An assistant may be needed to carry out this step.
Remove the two liftgate window glass hinge nuts.
To install, reverse the removal procedure.
1. Transfer components as necessary.