LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Protege5 Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P0112: Intake Air Temperature Sensor Circuit - Low Input >> Detection Condition

Detection Condition

DTC is set when voltage from Intake Air Temperature (IAT) sensor is less than .16 volt and ignition is on. This is a Continuous Monitor (CM). MIL is illuminated when PCM detects malfunction during first drive cycle. Pending code is not available. Freeze frame data is available and DTC is stored in PCM memory.

scientia non olet · About LEMON Manuals