LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Protege5 Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC 2009: Variable Tumble Control System Solenoid Valve Circuit - Low Input >> Detection Condition

Detection Condition

DTC is set when PCM detects low voltage input from Variable Tumble Control System (VTCS) solenoid valve when VTCS solenoid valve is off. This is a Continuous Monitor (CM). MIL illuminates if PCM detects malfunction condition in 2 consecutive drive cycles. Pending code is available if PCM detects malfunction condition during first drive cycle. Freeze Frame Data is available and DTC is stored in PCM memory.

scientia non olet · About LEMON Manuals