LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Protege5 Standard >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Lubrication >> Engine Oil Inspection

Engine Oil Inspection

  1. Position the vehicle on level ground.
  2. Warm up the engine to normal operating temperature and stop it.
  3. Wait for 5 min. 
  4. Remove the dipstick and inspect for oil level and condition. Verify that the oil level is within the F and L marks on the dipstick.
    • Add or replace oil if necessary.
  5. Verify that the dipstick O-ring is installed as shown, then reinstall the dipstick.
    Fig 1: Identifying Dipstick O-Ring
    G01913382Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals