LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Protege5 Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System >> Cruise Control Module Removal/Installation

Cruise Control Module Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the passenger-side front side trim. (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the figure(s).
    Fig 1: Removing Cruise Control Module
    G01913675Courtesy of MAZDA MOTORS CORP.
    Fig 2: Cruise Control Module Removal Sequence
    G01913674Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals