LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Protege ES, Standard >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Rear Buckle Removal/Installation

Rear Buckle Removal/Installation

  1. For 4SD, remove the rear seat cushion. For 5HB, lift up the rear seat cushion.
  2. Remove the bolt, then remove the rear buckle.
  3. Install in the reverse order of removal.
    Fig 1: Removing Rear Buckle Bolt
    G01914879Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals