LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Protege DX, Standard >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Trunk End Trim Removal/Installation

Trunk End Trim Removal/Installation

  1. Turn the weatherstrip over.
  2. Remove the fasteners.
  3. Disengage clips A using a fastener remover from the body.
  4. Pull the trunk end trim upward, then disengage pins B and C from the body.
    Fig 1: Removing Trunk End Trim
    G01915308Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals