LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Protege DX, Automatic >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Control System (HVAC) >> Resistor Inspection

Resistor Inspection

  1. Remove the glove compartment.
  2. Disconnect the resistor connector.
  3. Verify that the resistance between the terminals of the resistor is as indicated in the illustration.
    Fig 1: Identifying Resistor Connector Terminals
    G01914708Courtesy of MAZDA MOTORS CORP.
    Fig 2: Resistor Resistance Specifications
    G01914707Courtesy of MAZDA MOTORS CORP.
    • If not as specified, replace the resistor.
scientia non olet · About LEMON Manuals