LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Protege DX, Automatic >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Control System (HVAC) >> Climate Control Unit Wire Adjustment >> Airflow Mode Wire

Airflow Mode Wire

  1. Set the airflow mode control dial at defroster.
  2. Set the airflow mode main link to defroster in the direction shown by the arrow and insert a screwdriver at the set hole.
  3. Connect the airflow mode wire to airflow mode main link.
  4. Clamp the airflow mode wire to wire clamp.
  5. Verify that the airflow mode control dial moves its full stroke.
    Fig 1: Adjusting Airflow Mode Wire
    G01914727Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals