LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> Protege DX, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P0704: Clutch Switch Input Circuit Malfunction >> Detection Condition

Detection Condition

DTC is set when PCM has not received a voltage change from clutch switch when vehicle speed is more than 19 MPH and stopping vehicle 10 times repeatedly. This is a Continuous Monitor (CM). MIL illuminates if PCM detects malfunction condition in 2 consecutive drive cycles. Pending code is available if PCM detects malfunction condition during first drive cycle. Freeze Frame Data is available and DTC is stored in PCM memory.

scientia non olet · About LEMON Manuals