LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> MX-5 Miata LS, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Shift Mechanism >> Key Interlock Solenoid Inspection

Key Interlock Solenoid Inspection

  1. Disconnect the negative battery cable.
  2. Remove the column cover.
  3. Disconnect the key interlock solenoid connector.
  4. Insert the ignition key in the key cylinder.
  5. Inspect the key interlock operation when B+ is applied to the terminal as shown.
    • If not as specified, replace the key interlock solenoid.
    Fig 1: Inspecting Key Interlock Solenoid (1 Of 2)
    G01907622Courtesy of MAZDA MOTORS CORP.
    Fig 2: Inspecting Key Interlock Solenoid (2 Of 2)
    G01907623Courtesy of MAZDA MOTORS CORP.
  6. Install reverse order of removal.
  7. Connect the negative battery cable.
scientia non olet · About LEMON Manuals