General Notes
- The oil pan could contain small chips, shavings, and other particles helpful in inspecting the condition of the transmission and diagnosing certain problems. To ensure that all foreign particles stay in the oil pan, make sure that the transmission is never tipped completely over while the oil pan is still installed.
- Disassemble the transmission in a clean area (dustproof work space) to prevent entry of dust into the mechanisms.
- Use only plastic hammers when applying force to separate the light alloy case joints.
- Never use rags during disassembly; they may leave particles that can clog fluid passage.
- Several parts resemble one another, arrange them so that they do not get mixed up.
- Disassemble the control valve component and thoroughly clean it when the clutch has burned or when the ATF has degenerated.