LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> MX-5 Miata Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transmission Shift Mechanism) >> Selector Lever Removal/Installation >> Spring Pin Installation Note

Spring Pin Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. On level ground, jack up the vehicle and support it evenly on safety stands.
  2. Install a new spring pin as shown in the figure.
    Fig 1: Installing Spring Pin
    G01907642Courtesy of MAZDA MOTORS CORP.