LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> MX-5 Miata Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P0461: Fuel Gauge Sending Unit Circuit Range/Performance Problem >> Diagnostic Procedure

Diagnostic Procedure

  1. Verify Related Repair Information Availability -  Turn ignition off. Connect scan tool to DLC-2. See Figure. Turn ignition on, engine off. Monitor for FREEZE FRAME DATA and ensure data has been recorded. Check service bulletins for repair information related to this DTC. If repair information is not available, go to next step. If repair information is available, perform diagnosis and repair as necessary. After repair, go to step  3.
  2. Inspect Fuel Gauge Sender Unit -  Turn ignition off. Inspect fuel sending unit. See appropriate INSTRUMENT PANELS article in ACCESSORIES & EQUIPMENT. If fuel sending unit is faulty, replace fuel sending unit and go to next step. If fuel sender unit is okay, replace PCM. For PCM removal and installation, see POWERTRAIN CONTROL MODULE under COMPUTERIZED ENGINE CONTROLS in REMOVAL, OVERHAUL & INSTALLATION article. After repair, go to next step.
  3. Verify After Repair Procedure -  Using scan tool, perform After Repair Procedure. See AFTER REPAIR PROCEDURE . If no other DTCs are present, testing is complete. If any other DTC is present, go to applicable test and repair.
scientia non olet · About LEMON Manuals