LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> MX-5 Miata Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P2006: Variable Tumble Control System Malfunction - Stuck Closed >> Detection Condition

Detection Condition

DTC is set when PCM detects input voltage from Variable Tumble Control System (VTCS) vacuum switch remains low when VTCS solenoid valve is off. PCM determines that VTCS vacuum switch has malfunction. This is a Continuous Monitor (CM). MIL illuminates if PCM detects malfunction condition in two consecutive drive cycles. Pending Code is available if PCM detects malfunction condition during first drive cycle. Freeze Frame Data is available and DTC is stored in PCM memory.

scientia non olet · About LEMON Manuals