LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> MPV LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 173 (Cruise Control System) >> Actuator Cable Removal

Actuator Cable Removal

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cover from the cruise actuator.
  2. Remove the plug hole plate. (See TIMING CHAIN REMOVAL/INSTALLATION .)
  3. Move the throttle in the direction of the arrow and hold.
  4. Remove the end fitting of the actuator cable from the throttle.
    Fig 1: Removing Actuator Cable From Throttle
    G00998200Courtesy of MAZDA MOTORS CORP.
  5. Squeeze the hooks of the grommet, and remove the actuator cable.
    Fig 2: Removing Actuator Cable From Brackets
    G00998201Courtesy of MAZDA MOTORS CORP.
  6. Remove the end fitting of the actuator cable from the cruise actuator.
    Fig 3: Removing Actuator Cable From Cruise Actuator
    G00998202Courtesy of MAZDA MOTORS CORP.
  7. Squeeze the hooks of the grommet, and remove it from the cruise actuator.
  8. Remove the actuator cable.
    Fig 4: Removing Actuator Cable From Cruise Actuator Bracket
    G00998203Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals