LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> MPV LX >> Repair and Diagnosis >> Body & Frame >> Seats >> Third-Row Seat Removal/Installation >> Hinge

Third-Row Seat Removal/Installation: Hinge

  1. Remove the third-row seat.
  2. Remove the rear side trim. (See REAR SIDE TRIM REMOVAL/INSTALLATION .)
  3. Remove the third-row seat belt lower anchor.
  4. Remove in the order indicated in the figure below.
    Fig 1: Hinge Component Table
    G01887461Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
    Fig 2: Removing Third-Row Seat Belt Lower Anchor
    G01887462Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals