LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> MPV ES >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Shift Mechanism >> P Position Switch (Built-In Selector Lever) Inspection >> Continuity Inspection

Continuity Inspection

  1. Disconnect the negative battery cable.
  2. Remove the column cover.
  3. Disconnect the connector.
  4. Inspect the continuity.
    • If not as specified, replace selector lever. (See SELECTOR LEVER REMOVAL/INSTALLATION  .)
      Fig 1: P Position Switch Continuity Chart
      G01883487Courtesy of MAZDA MOTORS CORP.
      Fig 2: Identifying P Position Switch Connector Terminals
      G01883488Courtesy of MAZDA MOTORS CORP.
  5. Connect the connector.
  6. Install the column cover.
  7. Connect the negative battery cable.
scientia non olet · About LEMON Manuals