Rollover Valve: Installation
WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- A checker tab is integrated with the quick release connector for new fuel hoses.
- The checker tab will be released from the quick release connector after it is completely engaged with the fuel pipe.
- Inspect the fuel hose and fuel pipe sealing surface for damage and deformation, and replace as necessary.
- If the quick release connector O-ring is damaged or has slipped, replace a new fuel hose.
- Push the quick release connector into the fuel pipe until a click is heard.
- Pull the quick release connector by hand and verify that it is installed securely.