LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 416 (Fuel System) >> Fuel Pump Resistor Removal/Installation

Fuel Pump Resistor Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION .)
  2. Remove the secondary air injection (AIR) pump. (See SECONDARY AIR INJECTION (AIR) PUMP REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
  4. Install in the reverse order of removal.
    Fig 1: Removing/Installation Fuel Pump Resistor With Torque Specifications
    G03701913Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals