LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 401 (Glass/Windows/Mirrors) >> Power Outside Mirror Removal/Installation

Power Outside Mirror Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the inner garnish.
  3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  4. Partially peel off the door screen.
  5. Disconnect the connector.
  6. Remove the nuts, and then remove the power outside mirror.
  7. Install in the reverse order of removal.
    Fig 1: Removing Power Outside Mirror - With Torque Specifications
    G03701151Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals