Pulsation Damper Inspection
WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Complete the "BEFORE REPAIR PROCEDURE". (See BEFORE REPAIR PROCEDURE .)
- Remove the pulsation damper. (See PULSATION DAMPER REMOVAL/INSTALLATION .)
- Visually inspect the pulsation damper for damage and cracks. Also inspect if there is no extreme rust which will cause fuel leakage.
- If any of the above-mentioned malfunction is observed, replace the pulsation damper.
- Complete the "AFTER REPAIR PROCEDURE". (See AFTER REPAIR PROCEDURE .)