LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> MPV ES >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Lubrication >> Oil Cooler Removal/Installation >> Oil Cooler Installation Note

Oil Cooler Installation Note

  1. Install the locating pin on the oil cooler into the cast slot in the cylinder block.
  2. Rotate the oil cooler clockwise until the cooler stops.
    Fig 1: Rotating Oil Cooler Clockwise Until Cooler Stops
    G01888156Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals