LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> MPV ES >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> Front Axle >> Wheel Hub Bolt Replacement

Wheel Hub Bolt Replacement

  1. Remove the hub bolt using the SSTs. 
    NOTE:
    • If the dust cover interferes with the wheel hub bolt and the wheel hub bolt cannot be removed. Tap the part shown in the figure with a chisel lightly and bend the processing point back to the steering knuckle side.
  2. Install the hub bolt into the wheel hub and install a washer and hub nut on the hub bolt.
    Fig 1: Installing Special Service Tool On Wheel Hub
    G00993414Courtesy of MAZDA MOTORS CORP.
  3. Tighten the hub nut while holding the wheel hub using a brass bar.
    Fig 2: Tightening Hub Nut
    G00993415Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals