LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> MPV ES >> Repair and Diagnosis (Single Page) >> Steering >> Power Steering >> Power Steering System >> Steering Gear And Linkage Assembly >> Tie-rod End Boot Assembly Note

Tie-rod End Boot Assembly Note

  1. Wipe the grease off the ball joint.
  2. Put a small amount of lithium-based grease into a new dust boot.
  3. Install the dust boot onto the tie-rod end using the SST  and a press.
    Fig 1: Installing Dust Boot Onto Tie-Rod End
    G01883562Courtesy of MAZDA MOTORS CORP.
  4. Wipe away any excess grease.
scientia non olet · About LEMON Manuals