LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> B4000 Base, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Power Steering Fluid >> Final Fill Inspection

Final Fill Inspection

CAUTION:
  • Do not mix oil types, any mixture or any unapproved oil could lead to seal deterioration and leaks. A leak could ultimately cause loss of fluid, which could result in a loss of power steering assist.
  1. Fill the reservoir with the appropriate fluid; see STEERING SPECIFICATIONS .
  2. Remove fuse 19 (25A) from I/P fuse panel.
  3. Raise the front wheels off the floor; see JACKING .
    CAUTION:
    • Do not crank the engine for more than 15 seconds at a time. Allow the starter to cool for 1 minute before cranking again. Premature starter failure can occur.
      1. Do not hold the steering wheel against the stops for more than three to five seconds at a time. Damage to the power steering pump cold occur.
  4. Turn the steering wheel from stop-to-stop while cranking the engine. Check for fluid leakage.
  5. Lower the vehicle.
    CAUTION:
    • Do not overfill the reservoir.
  6. Fill the reservoir with the appropriate fluid.
  7. Install I/P fuse panel fuse 19 (25A).