LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> B4000 Base, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Ignition Lock Cylinder Removal/Installation >> Lock Cylinder Functional

Lock Cylinder Functional

  1. Disconnect the negative battery cable.
  2. Insert the ignition key (2) and turn to the RUN position.
  3. Press the lock cylinder release pin (3) while pulling out the lock cylinder.
  4. Install in reverse order of removal.
  5. Verify lock cylinder operation.
Fig 1: Pressing Lock Cylinder Release Pin While Pulling Out Lock Cylinder
G01924729Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals