LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> B2300 Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Door Lock Cylinder Removal/Installation

Door Lock Cylinder Removal/Installation

NOTE:
  • When a lock cylinder is replaced, both the door and ignition lock cylinders should be replaced in a set. This will eliminate carrying an extra key which will fit only one lock. If a key is to be replaced, the new key code number is stamped on a metal tag attached to the key.
  1. Raise the front window.
  2. Remove the front door trim panel. See DOOR TRIM PANEL FRONT REMOVAL/INSTALLATION .
  3. Remove the watershield.
  4. Disconnect the door lock cylinder rod from the door lock cylinder lever.
  5. Remove the door lock cylinder retainer (1).
  6. Remove the door lock cylinder (2).
    Fig 1: Removing Front Door Ajar Warning Switch
    G01926002Courtesy of MAZDA MOTORS CORP.
  7. Install in reverse order of removal.
scientia non olet · About LEMON Manuals