LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> 6 s, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Steering Gear And Linkage Assembly >> Mounting Rubber Assembly Note

Mounting Rubber Assembly Note

  1. Apply soapy water to the rubber part of the mounting rubber.
  2. Press the mounting rubber until the mounting rubber end comes out completely from the gear housing using the SSTs  and a press.
    Fig 1: Installing Mounting Rubber
    G01930655Courtesy of MAZDA MOTORS CORP.
  3. Reverse the gear housing, then press the mounting rubber until the mounting rubber end comes out completely from the other side. At this time, the mounting rubber end and steel pipe are aligned.
    Fig 2: Centering Mounting Rubber
    G01930656Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals