LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> 6 s, Standard >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Center Box Removal/Installation

Center Box Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the center panel module.
  3. Remove the screws.
  4. Pull the center box outward, then disengage the tabs.
  5. Disconnect the information display connector.
    Fig 1: Removing Center Box And Disconnecting Information Display Connector
    G01931221Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals