LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> 6 s, Automatic >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Front CROSSMEMBER >> Removal/Installation >> Notes

Front CROSSMEMBER: Removal/Installation: Notes

  1. Remove the under cover.
  2. Remove the splash shield.
  3. Remove the transverse member. See REMOVAL/INSTALLATION .
  4. Remove the steering gear and linkage, and pipe component installation bolts from the front crossmember, then suspend the steering gear and linkage with a cable.

    Tightening Torque

    • Steering gear and linkage: 54.88-77.29 ft. lbs. (74.4-104.8 N.m).
    • Pipe component: 69.1-95.5 inch lbs. (7.8-10.8 N.m).
  5. Remove in the order indicated in the illustration.
    Fig 1: Removing Front Crossmember
    G00375861Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
  7. Inspect the front wheel alignment. See WHEEL ALIGNMENT SPECIFICATIONS .
scientia non olet · About LEMON Manuals