LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> 6 i, Standard >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Front Lower Arm (Front) >> Removal/Installation >> Clip Installation Note

Clip Installation Note

  1. Wipe the grease off the ball stud.
  2. Fill the inside of the new dust boot with grease.
  3. Install the boot on the ball joint.
  4. Install the new clip using the SST. See Figure.
  5. Verify that the clip is installed securely to the groove.
  6. Wipe away the excess grease.
scientia non olet · About LEMON Manuals