LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> 6 i, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls [Self-Diagnostics 2.3L] >> Diagnostic Tests >> DTC P2123: Accelerator Pedal Position Sensor No. 1 Circuit - High Input >> Detection Condition

Detection Condition

The PCM monitors Accelerator Pedal Position (APP) sensor No. 1 signal at PCM 27-pin harness connector terminal "3D" (White wire). If PCM detected APP sensor No. 1 voltage reading was more than 4.5 volts, PCM determines APP sensor No. 1 circuit has malfunction. This is a Continuous Monitor (CM). MIL illuminates if PCM detects malfunction condition during first drive cycle. PENDING CODE is available if PCM detects malfunction condition. FREEZE FRAME DATA is available. DTC is stored in PCM memory.

scientia non olet · About LEMON Manuals