LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> 6 i, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Washer System & Wiper System >> Washer Fluid-Level Sensor Removal/Installation

Washer Fluid-Level Sensor Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the washer tank. (See WASHER TANK REMOVAL/INSTALLATION  )
  3. Remove in the order indicated in the illustration.
    Fig 1: Washer Fluid-Level Sensor Removal Order Table
    G01931363Courtesy of MAZDA MOTORS CORP.
    Fig 2: Removing Washer Fluid-Level Sensor
    G01931364Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals