LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> 6 i, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Washer System & Wiper System >> Washer Fluid-Level Sensor Inspection

Washer Fluid-Level Sensor Inspection

  1. Disconnect the negative battery cable.
  2. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION .)
  3. Inspect for continuity between the washer fluid-level sensor terminals using an ohmmeter.
    • If not as specified, replace the washer fluid-level sensor.
    Fig 1: Washer Fluid-Level And Terminals Continuity Chart
    G01931365Courtesy of MAZDA MOTORS CORP.
    Fig 2: Identifying Washer Fluid-Level Sensor Terminals
    G01931366Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals