LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2003 >> 6 i, Automatic >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Front Lower Arm (Rear) >> Removal/Installation >> Notes

Front Lower Arm (Rear): Removal/Installation: Notes

  1. Remove the under cover.
  2. Remove the splash shield.
  3. Remove the steering gear and linkage installation bolts, and pipe component installation bolts from the front crossmember, then suspend the steering gear and linkage with a cable.

    Tightening Torque

    • Steering gear and linkage: 54.88-77.29 ft. lbs. (74.4-104.8 N.m).
    • Pipe component: 69.1-95.5 inch lbs. (7.8-10.8 N.m).
  4. Remove in the order indicated in the illustration.
  5. Install in the reverse order of removal.
  6. Inspect the front wheel alignment. See WHEEL ALIGNMENT SPECIFICATIONS .
Fig 1: Removing Front Lower Arm (Rear)
G00375850Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals