LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute ES, FWD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Wheel Bearing >> Removal >> Notes

Wheel Bearing: Removal: Notes

NOTE: Install a new wheel bearing when the wheel hub is removed.
  1. Remove the brake disc. See REMOVAL & INSTALLATION FRONT BRAKE ROTOR for FRONT DISC BRAKE.
  2. Remove the wheel hub nut.
    Fig 1: Removing Wheel Hub Nut
    G00375734Courtesy of MAZDA MOTORS CORP.
  3. Remove the tie rod end nut. Remove the cotter pin (2). Remove the nut (1).
    Fig 2: Removing Tie Rod End Nut
    G00375735Courtesy of MAZDA MOTORS CORP.
  4. Using the special tool, separate the tie rod end from the knuckle.
    Fig 3: Separating Tie Rod End From Knuckle
    G00375736Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals