Vehicles with ABS

Disconnect the anti-lock brake harness from the strut and spring assembly.

1. Remove the bolt.
2. Position the bracket aside.
   Fig 1: Disconnecting Anti-Lock Brake Harness

   Courtesy of MAZDA MOTORS CORP.

1. Position the stabilizer bar link aside.
   1. Remove the upper stabilizer bar link nut.
      Fig 2: Disconnecting Upper Stabilizer Bar

      Courtesy of MAZDA MOTORS CORP.
   2. Position the stabilizer bar link aside.
2. Remove the strut-to-wheel knuckle bolts.
   Fig 3: Removing Spring Assembly Upper Nuts

   Courtesy of MAZDA MOTORS CORP.
3. Mark the bearing plate outer studs. Marking the studs will aid in restoring the caster/camber to its original settings during installation.
   NOTE: Support the strut and spring assembly when removing upper nuts.
4. Remove the strut and spring assembly.
   • Remove the nuts.
   Fig 4: Removing Upper Strut Spring Nuts

   Courtesy of MAZDA MOTORS CORP.
5. To install, reverse the removal procedure.
   • Align the front wheels to specifications. See SPECIFICATIONS article.