LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Protege5 Standard >> Repair and Diagnosis >> Transmission >> Manual Transaxle Clutch >> Clutch Unit Removal/Installation >> Flywheel Installation Note

Flywheel Installation Note

  1. Install the flywheel to the crankshaft.
  2. Hand-tighten the flywheel installation bolts.
  3. Install the SST  to the flywheel.
  4. Tighten the flywheel installation bolts in the pattern shown.

    Tightening torque 

    97-102 N.m (70.9-75.9 ft.lbf) 

    Fig 1: Installing SST To Flywheel
    G01914346Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals