LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Protege5 Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control Module Removal/Installation

Cruise Control Module Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the passenger-side front side trim. See FRONT SIDE TRIM REMOVAL/INSTALLATION .
  3. Remove in the order indicated in the table.
    Fig 1: Removing/Installing Cruise Control Module (1 Of 2)
    G01187107Courtesy of MAZDA MOTORS CORP.
    Fig 2: Removing/Installing Cruise Control Module (2 Of 2)
    G01187108Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals