LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Protege5 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 289 (Control System (HVAC)) >> Refrigerant Pressure Switch Removal/Installation >> Notes

Refrigerant Pressure Switch Removal/Installation: Notes

WARNING: This page is about a different car, the 2003 Mazda Protege5 and 2003 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the receiver/drier. (See RECEIVER/DRIER REMOVAL/INSTALLATION .)
  3. Remove the refrigerant pressure switch. (See REFRIGERANT PRESSURE SWITCH INSTALLATION NOTE  )
    Fig 1: Removing Refrigerant Pressure Switch
    G01914718Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals